Powder coated frame restoration · Southampton

Powder coated frame restoration in Southampton.

Faded shopfronts, curtain walls and entrance frames recovered to a matched RAL or BS finish. Works carried out around live trading. Written service-life expectation with every scheme. Delivered across Southampton and Hampshire. Retail refurbishment, commercial decorating and industrial coatings across Southampton and the south coast. WestQuay and the city-centre retail estate, port and logistics units along the docks, and the coastal weathering that drives frame restoration and facade work on exposed elevations.

Southampton programme

How we run powder coated frame restoration schemes locally.

1. 01 · Survey

   Frame-by-frame walk. Gloss-meter reading on a clean reference area, RAL identification via Pantone bridge or direct match. Adhesion test on the existing powder coat. Restoration only goes ahead if the substrate holds. If a frame needs replacing, we tell you at survey.

2. 02 · Specification

   PPG or AkzoNobel two-pack tie-coat over light abrasion, matched RAL topcoat at 60-80 µm dry film thickness. Service-life expectation written into the spec, not implied.

3. 03 · RAMS

   Masking method for glazing, gaskets and signage. Spray containment where the frame is on a public route. COSHH for tie-coat solvents.

4. 04 · Delivery

   Prepare, mask, prime, apply and demask within the same shift where access permits. Glazing checked at demask. Adjacent finishes wiped before public reopening.

5. 05 · Handover

   Before/after photo record, gloss reading on completed work, written service-life note. Typical expectation is 5-7 years on a sound substrate.

Frequently asked · Southampton

What clients in Southampton usually ask first.

Do you work around live retail at WestQuay and in town?

Yes. Retail work is phased around trading, with overnight cuts where the landlord or centre requires them.

Can you handle coastal weathering on frames and facades?

Yes. Salt-laden exposure is hard on coatings; we restore powder-coated frames and recoat facades to suit the exposure, not a generic spec.

Do you cover the port and industrial estates?

Yes. Warehouse and industrial coatings around the docks and the Nursling and Totton estates are a regular part of the Hampshire programme.

How long will the finish last?

5-7 years is the typical expected service life when the specification matches the substrate. We confirm the expectation in writing per scheme.

Can you match an existing RAL?

Yes. We sample on site, send a card for sign-off if needed, and apply the matched system.

Can the work happen while the unit is trading?

Yes. Most schemes are delivered phased around live trading with extended masking and overnight cuts where foot traffic requires it.

Do you protect the glazing?

Glazing, gaskets, ironmongery and signage are masked before primer goes on. The glass is checked at demask before public reopening.

What if the substrate is damaged?

We flag substrate failure at survey. If a frame needs replacing we tell you. We won't coat over a failing substrate and sign it off.