On-site spraying · Southampton

On-site commercial spraying in Southampton.

A factory-grade spray finish, done on site without taking anything out. HVLP for control on the detail and edges, airless for the big repetitive runs. Full polythene masking and live-site extraction so the rest of the building keeps working. Delivered across Southampton and Hampshire. Retail refurbishment, commercial decorating and industrial coatings across Southampton and the south coast. WestQuay and the city-centre retail estate, port and logistics units along the docks, and the coastal weathering that drives frame restoration and facade work on exposed elevations.

Southampton programme

How we run on-site spraying schemes locally.

1. 01 · Survey

   Access method (mast, scissor, scaffold), substrate type, adjacent glazing exposure, extraction requirement. Sample cut on substrate where finish standard is critical, agreed in writing before mobilisation.

2. 02 · Specification

   HVLP for control on detail and edges; airless for repetitive large coverage. Agreed dry film thickness per coat. Sheen level confirmed against a physical sample on the actual substrate.

3. 03 · RAMS

   Full polythene masking schedule, dust-curtain locations, extraction plan, respirator matrix, exclusion zones during atomisation. Public routes and adjacent occupied areas called out specifically.

4. 04 · Delivery

   Mask, sample-cut for client approval, spray in phases, demask each phase before the next starts. Adjacent finishes inspected at demask. No open-overnight masking left on live glazing.

5. 05 · Handover

   Walk-the-line, snag, sign-off. Film-thickness check at random sample points where the spec calls for it. Photo record of finished elevations.

Frequently asked · Southampton

What clients in Southampton usually ask first.

Do you work around live retail at WestQuay and in town?

Yes. Retail work is phased around trading, with overnight cuts where the landlord or centre requires them.

Can you handle coastal weathering on frames and facades?

Yes. Salt-laden exposure is hard on coatings; we restore powder-coated frames and recoat facades to suit the exposure, not a generic spec.

Do you cover the port and industrial estates?

Yes. Warehouse and industrial coatings around the docks and the Nursling and Totton estates are a regular part of the Hampshire programme.

How do you control overspray?

Full polythene masking, dust curtains where airflow allows, and extraction where the site permits. We sample-cut before full coverage so the finish is agreed before scale begins.

How fast does it dry?

Most water-based finishes are touch-dry within 30 minutes and recoatable within 2-4 hours. Solvent systems need longer and we plan the shift pattern around them.

Can you spray at height?

Yes. Mast lifts, scissor lifts and scaffold are standard. Access method is confirmed at survey.

Will glazing be protected?

Glazing, gaskets and surrounding fixtures are masked before primer. Glass is checked at demask before handover.

Can you work during trading hours?

Often yes, with the right extraction and shift pattern. Some sites need overnight delivery. We agree the approach at survey, not on the morning of mobilisation.