Floor coatings · Swindon

Epoxy floor coatings in Swindon.

Epoxy, polyurethane and chemical-resistant floor systems for warehouses, distribution centres and commercial premises. The system is matched to the substrate, the traffic load and how much downtime you can give us. Delivered across Swindon and Wiltshire. Warehouse coatings, resin floors and industrial decorating across Swindon. The town's distribution and logistics estates along the M4, and the manufacturing units that came with them, are the core of the programme. Live-site wall and steel coatings, epoxy floors specified to forklift traffic, all delivered zone by zone.

Swindon programme

How we run floor coatings schemes locally.

1. 01 · Survey

   Substrate moisture test (Tramex or hygrometer), cohesion check, traffic load assessment, chemical exposure inventory, downtime window. The cure schedule is agreed before specification, not after.

2. 02 · Specification

   System selected by substrate, load class and use: epoxy screed for heavy forklift traffic, polyurethane for food environments and thermal cycling, chemical-resistant PU where required. Anti-slip aggregate grade specified if needed. Cure schedule set to the system, not the client's preferred weekend.

3. 03 · RAMS

   Project-specific RAMS including ventilation plan, pedestrian and forklift exclusion zones during application and cure, COSHH for solvent and catalyst components.

4. 04 · Delivery

   Shot-blast or diamond-grind substrate, vacuum clean, apply primer, lay system coats to specified film build, broadcast aggregate if in spec, cure, line-mark.

5. 05 · Handover

   As-applied record (product batch, film thickness readings, application temperatures), anti-slip classification where applicable, cleaning and maintenance regime.

Frequently asked · Swindon

What clients in Swindon usually ask first.

Can you coat a working distribution centre?

Yes. We phase by zone so picking and dispatch carry on around us, reopening each area before moving to the next.

Do you do warehouse floor coatings?

Yes. Epoxy and polyurethane systems specified to the slab and the traffic load, with the downtime agreed up front, not assumed.

What about access in high-bay units?

MEWPs, scaffold and mast climbers as the building needs; agreed at survey alongside the traffic-management plan.

How long is the cure before forklift traffic?

Walk-on is typically 12-24 hours. Forklift-ready is typically 5-7 days, depending on system and temperature. Confirmed in writing per scheme.

Can you include anti-slip?

Yes. Aluminium oxide, glass bead or quartz aggregate broadcast into the topcoat. Slip-resistance rating to the specified class.

Will it survive heavy forklift traffic?

Yes, with the right system. We specify to the actual traffic load class, not a generic warehouse spec.

Can it be done over a weekend?

Some systems can, some can't. It depends on substrate moisture, ventilation and the cure rate. We agree the realistic handover at survey, based on the actual cure time.

What warranty comes with the floor?

System-dependent. Most schemes ship with a manufacturer-backed warranty where we are the approved applicator.