On-site spraying · Swindon

On-site commercial spraying in Swindon.

A factory-grade spray finish, done on site without taking anything out. HVLP for control on the detail and edges, airless for the big repetitive runs. Full polythene masking and live-site extraction so the rest of the building keeps working. Delivered across Swindon and Wiltshire. Warehouse coatings, resin floors and industrial decorating across Swindon. The town's distribution and logistics estates along the M4, and the manufacturing units that came with them, are the core of the programme. Live-site wall and steel coatings, epoxy floors specified to forklift traffic, all delivered zone by zone.

Swindon programme

How we run on-site spraying schemes locally.

1. 01 · Survey

   Access method (mast, scissor, scaffold), substrate type, adjacent glazing exposure, extraction requirement. Sample cut on substrate where finish standard is critical, agreed in writing before mobilisation.

2. 02 · Specification

   HVLP for control on detail and edges; airless for repetitive large coverage. Agreed dry film thickness per coat. Sheen level confirmed against a physical sample on the actual substrate.

3. 03 · RAMS

   Full polythene masking schedule, dust-curtain locations, extraction plan, respirator matrix, exclusion zones during atomisation. Public routes and adjacent occupied areas called out specifically.

4. 04 · Delivery

   Mask, sample-cut for client approval, spray in phases, demask each phase before the next starts. Adjacent finishes inspected at demask. No open-overnight masking left on live glazing.

5. 05 · Handover

   Walk-the-line, snag, sign-off. Film-thickness check at random sample points where the spec calls for it. Photo record of finished elevations.

Frequently asked · Swindon

What clients in Swindon usually ask first.

Can you coat a working distribution centre?

Yes. We phase by zone so picking and dispatch carry on around us, reopening each area before moving to the next.

Do you do warehouse floor coatings?

Yes. Epoxy and polyurethane systems specified to the slab and the traffic load, with the downtime agreed up front, not assumed.

What about access in high-bay units?

MEWPs, scaffold and mast climbers as the building needs; agreed at survey alongside the traffic-management plan.

How do you control overspray?

Full polythene masking, dust curtains where airflow allows, and extraction where the site permits. We sample-cut before full coverage so the finish is agreed before scale begins.

How fast does it dry?

Most water-based finishes are touch-dry within 30 minutes and recoatable within 2-4 hours. Solvent systems need longer and we plan the shift pattern around them.

Can you spray at height?

Yes. Mast lifts, scissor lifts and scaffold are standard. Access method is confirmed at survey.

Will glazing be protected?

Glazing, gaskets and surrounding fixtures are masked before primer. Glass is checked at demask before handover.

Can you work during trading hours?

Often yes, with the right extraction and shift pattern. Some sites need overnight delivery. We agree the approach at survey, not on the morning of mobilisation.