Do you handle heritage and conservation area facades?

Yes. DOFF steam and chemical cleaning are core to the South West programme, including listed buildings and conservation area shopfronts where pressure washing isn't an option.

How quickly can you survey in Bristol?

Bristol and the M4 corridor are a regular run from our Dorset base. We confirm the survey date against the live brief and access needs.

Can you work around live retail trading?

Yes. Most Bristol retail work is phased around opening hours, with overnight cuts where the centre requires it.

How long will the finish last?

It depends on the existing powder coat, orientation, exposure, preparation and the selected system. We inspect and adhesion-test the frame first, then assess the selected specification against the manufacturer's product information.

Can you match an existing RAL?

Yes. We sample on site, send a card for sign off if needed, and apply the matched system.

Can the work happen while the unit is trading?

Yes. Most schemes are delivered phased around live trading with extended masking and overnight cuts where foot traffic requires it.

Do you protect the glazing?

Glazing, gaskets, ironmongery and signage are masked before primer goes on. The glass is checked at demask before public reopening.

What if the substrate is damaged?

We flag substrate failure at survey. If a frame needs replacing we tell you. We won't coat over a failing substrate and sign it off.

Powder coated frame restoration · Bristol

Powder coated frame restoration in Bristol.

Faded shopfronts, curtain walls and entrance frames recovered to a matched RAL or BS finish. Works carried out around live trading after substrate testing. Delivered across Bristol and South West. Commercial decorating, frame restoration and facade cleaning across Bristol and the wider South West. Cabot Circus and Cribbs Causeway retail through to harbourside offices and the city's stock of painted render and stone. Much of it in conservation areas.

Request a survey Call 077 6178 1304 See relevant projects

Why Bristol

Why choose us for powder coated frame restoration in Bristol and South West.

Track record

No frame removal. Works carried out around live trading
RAL or BS finish matched on site with gloss meter verification at handover
System selected after substrate testing and recorded at handover

Right fit when

Frames look faded but remain structurally sound.
Replacement is disruptive, capital intensive or planning restricted.
Brand consistency across the estate matters and replacement won't deliver it in time.

Scope · included

What you get when you brief us for powder coated frame restoration in Bristol.

Preparation and decontamination on site
Masking of glazing, gaskets and ironmongery
Matched RAL or BS finish
System and product record for the surveyed substrate

Sectors · Bristol

Types of building we cover with powder coated frame restoration in Bristol.

Retail
Office
Hospitality
Heritage
Education

Bristol programme

How we run powder coated frame restoration schemes locally.

Survey

Frame by frame walk. Gloss meter reading on a clean reference area, RAL identification via Pantone bridge or direct match. Adhesion test on the existing powder coat. Restoration only goes ahead if the substrate holds. If a frame needs replacing, we tell you at survey.

Specification

PPG or AkzoNobel two pack tie coat over light abrasion, with a matched RAL topcoat. The final system is selected after adhesion testing and recorded in the specification.

RAMS

Masking method for glazing, gaskets and signage. Spray containment where the frame is on a public route. COSHH for tie coat solvents.

Delivery

Prepare, mask, prime, apply and demask within the same shift where access permits. Glazing checked at demask. Adjacent finishes wiped before public reopening.

Handover

Before/after photo record, gloss reading on completed work and the specified product record.

CHAS Accredited

Site Safety Plus

Dulux Academy

Frequently asked · Bristol

What clients in Bristol usually ask first.

Do you handle heritage and conservation area facades?: Yes. DOFF steam and chemical cleaning are core to the South West programme, including listed buildings and conservation area shopfronts where pressure washing isn't an option.
How quickly can you survey in Bristol?: Bristol and the M4 corridor are a regular run from our Dorset base. We confirm the survey date against the live brief and access needs.
Can you work around live retail trading?: Yes. Most Bristol retail work is phased around opening hours, with overnight cuts where the centre requires it.
How long will the finish last?: It depends on the existing powder coat, orientation, exposure, preparation and the selected system. We inspect and adhesion-test the frame first, then assess the selected specification against the manufacturer's product information.
Can you match an existing RAL?: Yes. We sample on site, send a card for sign off if needed, and apply the matched system.
Can the work happen while the unit is trading?: Yes. Most schemes are delivered phased around live trading with extended masking and overnight cuts where foot traffic requires it.
Do you protect the glazing?: Glazing, gaskets, ironmongery and signage are masked before primer goes on. The glass is checked at demask before public reopening.
What if the substrate is damaged?: We flag substrate failure at survey. If a frame needs replacing we tell you. We won't coat over a failing substrate and sign it off.

Also in Bristol

Other services we deliver in Bristol and South West.

Recent work

Recent work across South West.

Tesco · TauntonView case study →

Cross link

See the full Powder coated frame restoration service →All services in Bristol →

Start a conversation

Send photos, drawings or a short scope.

We will review the service route, access, preparation, finish and likely next step before the job is priced properly.

Talk to the project lead Call now