Are you based in London?

We're a southern-England contractor with a standing London programme. Mobilisation is typically same-week, with surveys inside 48 hours.

Can you work out-of-hours in central London?

Yes. Most of our London work is overnight or phased around live trading. The cost model assumes night works, not a variation bolted on later.

How do you handle ULEZ and the congestion charge?

All site vehicles are ULEZ-compliant. Congestion charge and parking sit inside the cost model from the start.

How long will the coating last?

10 years on a properly specified system over a sound, well-prepared substrate. We confirm the expectation in writing per scheme.

Can you match our brand colour?

Yes. RAL or BS colour matched on site. Where estate consistency is the goal, a single reference colour is agreed and applied across all elevations.

Can it be done without scaffolding?

Often yes, with tracked MEWPs for low-to-mid elevations. Agreed at survey based on elevation height, edge condition and reach. Scaffold is specified where MEWPs can't safely access.

Can the building stay operational?

Usually yes. Cleaning is the noisiest phase; coating is relatively quiet. Phased elevation delivery means no single phase closes the whole building.

What about glazing in curtain wall?

All glazing, gaskets and penetrations are masked before preparation starts and checked at demask before the elevation reopens.

Roof, wall and cladding coatings · London

Cladding coatings in London.

TOR and spray combination systems for profile sheet, rainscreen and curtain-wall cladding. DOFF-cleaned substrate, RAL-matched finish. 10-year service-life options on sound metal cladding. Delivered across London and Greater London. Commercial decorating, on-site spraying and shopfront restoration across London. Most of the London programme is overnight and phased delivery for retail estates and main contractors. Oxford Street and Westfield units through to office fit-outs in the City. All worked around trading hours.

Request a survey Call 077 6178 1304 See relevant projects

Why London

Why choose us for roof, wall and cladding coatings in London and Greater London.

Track record

TOR and spray combined, system chosen by substrate condition
10-year service-life options on sound metal cladding substrates
Full project-specific RAMS, not a generic one-pager

Right fit when

Cladding profile is structurally sound but the finish is fading, chalking or failing adhesion.
Replacement is capital-prohibitive, planning-restricted or simply too disruptive.
Brand or estate consistency requires a matched colour across multiple elevations.

Scope · included

What you get when you brief us for roof, wall and cladding coatings in London.

DOFF steam or chemical cleaning preparation
Primer and topcoat system to substrate type
MEWP or scaffold access, edge protection in RAMS
Written service-life expectation per scheme

Sectors · London

Types of building we cover with roof, wall and cladding coatings in London.

Logistics
Industrial
Retail

London programme

How we run roof, wall and cladding coatings schemes locally.

01 · Survey
Cladding type (profile sheet, cassette, ACM, rainscreen), adhesion test on existing coating, substrate condition, RAL reference, access assessment (roof parapet, elevation height, MEWP reach or scaffold requirement).
02 · Specification
Cleaning method first: DOFF, chemical or pressure wash, matched to substrate. Then primer and topcoat system to service-life target. 10-year options available on sound metal substrates. Sample panel agreed before full application.
03 · RAMS
Project-specific RAMS covering cleaning run-off containment, MEWP or scaffold access plan, edge-protection specification, wind-loading restrictions on spray application, COSHH.
04 · Delivery
Clean substrate, prepare any surface defects, mask glazing and penetrations, prime in passes, apply topcoat. Phased by elevation so the building stays operational throughout.
05 · Handover
As-applied record (product batch, film thickness, weather conditions at application), before/after photo log, written service-life expectation.

CHAS Accredited

Site Safety Plus

Dulux Academy

Frequently asked · London

What clients in London usually ask first.

Are you based in London?: We're a southern-England contractor with a standing London programme. Mobilisation is typically same-week, with surveys inside 48 hours.
Can you work out-of-hours in central London?: Yes. Most of our London work is overnight or phased around live trading. The cost model assumes night works, not a variation bolted on later.
How do you handle ULEZ and the congestion charge?: All site vehicles are ULEZ-compliant. Congestion charge and parking sit inside the cost model from the start.
How long will the coating last?: 10 years on a properly specified system over a sound, well-prepared substrate. We confirm the expectation in writing per scheme.
Can you match our brand colour?: Yes. RAL or BS colour matched on site. Where estate consistency is the goal, a single reference colour is agreed and applied across all elevations.
Can it be done without scaffolding?: Often yes, with tracked MEWPs for low-to-mid elevations. Agreed at survey based on elevation height, edge condition and reach. Scaffold is specified where MEWPs can't safely access.
Can the building stay operational?: Usually yes. Cleaning is the noisiest phase; coating is relatively quiet. Phased elevation delivery means no single phase closes the whole building.
What about glazing in curtain wall?: All glazing, gaskets and penetrations are masked before preparation starts and checked at demask before the elevation reopens.

Also in London

Other services we deliver in London and Greater London.

Recent work

Recent work across Greater London.

Cross-link

See the full Roof, wall and cladding coatings service →All services in London →

Start a conversation

Send photos, drawings or a short scope.

We will review the service route, access, preparation, finish and likely next step before the job is priced properly.

Talk to the project lead Call now